Software: Apache/2.2.16 (Debian). PHP/5.3.3-7+squeeze19 uname -a: Linux mail.tri-specialutilitydistrict.com 2.6.32-5-amd64 #1 SMP Tue May 13 16:34:35 UTC uid=33(www-data) gid=33(www-data) groups=33(www-data) Safe-mode: OFF (not secure) /etc/ drwxr-xr-x | |
| Viewing file: Select action/file-type: # libsensors configuration file
# -----------------------------
#
# This default configuration file only includes statements which do not
# differ from one mainboard to the next. Only label, compute and set
# statements for internal voltage and temperature sensors are included.
#
# In general, local changes should not be added to this file, but rather
# placed in custom configuration files located in /etc/sensors.d. This
# approach makes further updates much easier.
#
# Such custom configuration files for specific mainboards can be found at
# http://www.lm-sensors.org/wiki/Configurations
#
# It is recommended not to modify this file, but to drop your local
# changes in /etc/sensors.d/. File with names that start with a dot
# are ignored.
chip "lm78-*" "lm79-*" "lm80-*"
label temp1 "M/B Temp"
chip "w83792d-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in6 "+5V"
label in7 "5VSB"
label in8 "Vbat"
set in6_min 5.0 * 0.90
set in6_max 5.0 * 1.10
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "w83793-*"
label in0 "VcoreA"
label in1 "VcoreB"
label in7 "+5V"
label in8 "5VSB"
label in9 "Vbat"
set in7_min 5.0 * 0.90
set in7_max 5.0 * 1.10
set in8_min 5.0 * 0.90
set in8_max 5.0 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
chip "via686a-*"
label in0 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
chip "adm1025-*" "ne1619-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp1 "CPU Temp"
label temp2 "M/B Temp"
chip "lm87-*" "adm1024-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
label temp1 "M/B Temp"
label temp2 "CPU Temp"
chip "it87-*" "it8712-*" "it8716-*" "it8718-*" "it8720-*"
label in8 "Vbat"
chip "fscpos-*" "fscher-*"
#FSC "Hermes"
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label temp1 "CPU Temp"
label temp2 "M/B Temp"
label temp3 "Aux Temp"
chip "fscscy-*"
#FSC "Scylla"
label in0 "+12V"
label in1 "+5V"
label in2 "+3.3V"
label temp1 "CPU0 Temp"
label temp2 "CPU1 Temp"
label temp3 "M/B Temp"
label temp4 "Aux Temp"
chip "fschds-*"
# Fujitsu Technology Solutions, "Hades"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp2 "Super I/O Temp"
label temp3 "System Temp"
# Fans
label fan1 "PSU Fan"
label fan2 "CPU Fan"
label fan3 "System FAN2"
label fan4 "System FAN3"
label fan5 "System FAN4"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
chip "fscsyl-*"
# Fujitsu Technology Solutions, "Syleus"-Chip
# Temperatures
label temp1 "CPU Temp"
label temp4 "Super I/O Temp"
label temp5 "Northbridge Temp"
# Fans
label fan1 "CPU Fan"
label fan2 "System FAN2"
label fan3 "System FAN3"
label fan4 "System FAN4"
label fan7 "PSU Fan"
# Voltages
label in0 "+12V"
label in1 "+5V"
label in2 "Vbat"
label in3 "+3.3V"
label in5 "+3.3V-Aux"
chip "vt1211-*"
label in5 "+3.3V"
label temp2 "SIO Temp"
chip "vt8231-*"
label in5 "+3.3V"
chip "smsc47m192-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "VCC"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
label temp1 "SIO Temp"
chip "lm85-*" "lm85b-*" "lm85c-*" "adm1027-*" "adt7463-*" "adt7468-*" "emc6d100-*" "emc6d102-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your chip is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
chip "pc87365-*" "pc87366-*"
# Voltage inputs
label in7 "3VSB"
label in8 "VDD"
label in9 "Vbat"
label in10 "AVDD"
compute in7 @*2, @/2
compute in8 @*2, @/2
compute in10 @*2, @/2
# These are the operating conditions as recommended by National
# Semiconductor
set in7_min 3.0
set in7_max 3.6
set in8_min 3.0
set in8_max 3.6
set in10_min 3.0
set in10_max 3.6
# Depending on the hardware setup, the battery voltage may or may not
# be monitored.
# set in9_min 2.4
# set in9_max 3.6
label temp3 "SIO Temp"
set temp3_min 0
set temp3_max 70
set temp3_crit 85
chip "adm1030-*" "adm1031-*"
label temp1 "M/B Temp"
chip "w83627ehf-*" "w83627dhg-*"
label in0 "Vcore"
label in2 "AVCC"
label in3 "VCC"
label in7 "3VSB"
label in8 "Vbat"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 3.3 * 0.90
set in3_max 3.3 * 1.10
set in7_min 3.3 * 0.90
set in7_max 3.3 * 1.10
set in8_min 3.0 * 0.90
set in8_max 3.0 * 1.10
chip "f71805f-*"
label in0 "+3.3V"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
chip "f71872f-*"
label in0 "+3.3V"
label in9 "Vbat"
label in10 "3VSB"
set in0_min 3.3 * 0.90
set in0_max 3.3 * 1.10
set in9_min 3.0 * 0.90
set in9_max 3.0 * 1.10
set in10_min 3.3 * 0.90
set in10_max 3.3 * 1.10
chip "k8temp-*"
label temp1 "Core0 Temp"
label temp2 "Core0 Temp"
label temp3 "Core1 Temp"
label temp4 "Core1 Temp"
chip "dme1737-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch311x-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
set in4_min 12.0 * 0.90
set in4_max 12.0 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "sch5027-*"
label in0 "5VSB"
label in1 "Vcore"
label in2 "+3.3V"
label in5 "3VSB"
label in6 "Vbat"
label temp2 "SIO Temp"
set in0_min 5.0 * 0.90
set in0_max 5.0 * 1.10
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in5_min 3.3 * 0.90
set in5_max 3.3 * 1.10
set in6_min 3.0 * 0.90
set in6_max 3.0 * 1.10
chip "f71882fg-*"
label in0 "+3.3V"
label in7 "3VSB"
label in8 "Vbat"
compute in0 @*2, @/2
compute in7 @*2, @/2
compute in8 @*2, @/2
chip "f8000-*"
label in0 "+3.3V"
label in1 "3VSB"
label in2 "Vbat"
compute in0 @*2, @/2
compute in1 @*2, @/2
compute in2 @*2, @/2
chip "adt7473-*" "adt7475-*"
label in2 "+3.3V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
label temp2 "Board Temp"
chip "adt7476-*" "adt7490-*"
label in1 "Vcore"
label in2 "+3.3V"
label in3 "+5V"
label in4 "+12V"
set in2_min 3.3 * 0.90
set in2_max 3.3 * 1.10
set in3_min 5.0 * 0.90
set in3_max 5.0 * 1.10
# Depending on how your ADT7476 is hardwired, you may or may not have
# +12V readings.
# set in4_min 12.0 * 0.90
# set in4_max 12.0 * 1.10
label temp2 "M/B Temp"
|
:: Command execute :: | |
--[ c99shell v. 2.0 [PHP 7 Update] [25.02.2019] maintained by KaizenLouie | C99Shell Github | Generation time: 0.0082 ]-- |